X-750 Nickel Based Round Bar-manufacture,factory,supplier from China

Alloy X-750 exhibits excellent oxidation resistance to combustion gases at ambient temperatures up to 1600°F(870°C).Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines, blades, powder and engines，etcFeatureHi

Class: E316HTX-XAWS: A5.22Conforms to Certification: AWS A5.22                       ASME SFA A5.22Weld Process: Gas Metal ArcAWS Chemical Composition RequirementsC = 0.04 – 0.08S = 0.03 maxMn = 0.5 – 2.5Cr = 17.0 – 20.0Si = 1.0 maxNi = 11.0 – 14.0P = 0.04 maxMo = 2.0 – 3.0Cu = 0.75 maxApplicationElectrodes of this classification usually are used for welding similar alloys.

Application is very wide, below 980 ℃ has sufficient strength and corrosion resistance and oxidation resistance.1.Manufacture of springs and bolts working under high temperature; rotor blades, impellers and other structural parts of gas turbines;2. Thrust chamber on rocket engines;3. Thrust reversal device on aircraft;4.

Alloy 718 (UNS N07718) is a high-strength, nickel-based superalloy made for long-term use in temperatures ranging from cryogenic up to 1200°F.

Section shrinkage ψ(%):134 degrees, aging ≥ 61Density melting point for Young's modulus and Poisson's ratio, yield strength, tensile strength, elongationProduct Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turb

ncoloy617/alloy617 alloy processing and welding properties: the alloy is easy to process in a variety of hot and cold processing, although due to the high strength, high-power equipment is required. Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180

Application field:(1)instrument transformerd(2)rader pulse transformers(3)Transducers(4)Shielding(5)tape recorder head laminations and so onProduct Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines, blades, powder

Hastelloy X C276 C22 Incoloy 800H 901 907 908 Monel 400 K500 Alloy Steel Sheet PlateTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etcMonel: Monel 400/K5

Monel 400 Round BarsMonel 400 Round Bar is a ductile, nickel-copper based totally alloy comprised in truth of two-thirds nickel and one 1/3 copper. Nickel Alloy four hundred is recognised for resistance to a range of corrosive conditions, together with alkalies (or acid like substances), saltwater, hydrofluoric acid and sulfuric acid.

718 Nickel-based alloyProduct  description718 Nickel-based alloy  is specifically γ '[ Ni3(Al, Ti, Nb)] Nickel based high temperature alloys with getting older reinforcement have proper corrosion resistance and oxidation performance beneath 980 °C, excessive strength below 800 °C, and proper rest resistance underneath 540 °C.

Inconel 718 Round BarInconel 718 Round bars are stable cylindrical bars made from the high-strength & corrosion-resistant nickel-based superalloy recognised as Inconel 718. The spherical bar is normally machined or solid to the favored structure & size, and it can be heat-treated to decorate its mechanical properties. The aerospace, nuclear, & gasoline turbine industries oftentimes use these bars requiring high-temperature and high-stress resistance. Inconel 718 spherical bar is handy in a number of sizes & lengths.

300 series stainless steel round rod :316 stainless steel round rod, 304L stainless steel round rod, 304 stainless steel round rod, 310 stainless steel round rod, 303 stainless steel round rod, 302 stainless steel round rod, 301 stainless steel round rod,200 series stainless steel round rod :202 stainless steel round rod, 201 stainless steel round rod,400 series stainless steel round bar :410 stainless steel round bar, 420 stainless steel round bar, 430 stainless steel round bar300 series stainless steel round rod details:316L stainless steel round rod :316 stainless steel contains molybdenum

Product SpecificationThickness/Diameter>4 inchSingle Piece Length3 meter, 6 meterMaterialStainless SteelShapeRoundDiameter6 to 400 mmLength1 ~ 8 metersProduct DescriptionWe stock Bar, Hexagon, Square, Round products in various dimensions and grades. We stock Stainless steels supplied in the as rolled, annealed and normalized conditions.

Introduction of Stainless steel round barPopular for its corrosion resistance, stainless steel rod is used in a wide range of applications including the construction of building foundations, bridges, and marine environments.We have black bright surface, and different materials such as 201 304 304L 316 316L 2205 2507 430 420 410 for you to choose.StandardASTM A479,ASTM A276,ASTM A484, ASTM A582, ASME SA276, ASME SA484, GB/T1220, GB4226, etc.Material301, 304, 304L, 309S, 321, 316, 316L, 317, 317L, 

The alloy is resistant to high temperature corrosion properties such as oxidation and carbonization. The alloy is *** resistant to corrosion in hot corrosion areas such as sulfide environments, especially oxidation and carbonization up to 1100°C cycles. These corrosion resistance coupled with excellent mechanical properties make this alloy particularly suitable for high temperature applications.

Monel K500 Round BarMonel K500 Round Bar is a age hardened alloy, whose basic composition makeup consists of elements like Nickel&Copper. Which combines the corrosion resistance of Alloy 400 with the high strength, fatigue resistance and erosion resistance.Monel K500 is a nickel-copper alloy, precipitation hardenable through additions of aluminium and titanium. Monel K500 has excellent corrosion resistant characteristics.

Incoloy 330 is a nickel-ferrichrome austenite alloy.specifically designed for antioxidant and carburizing effects in high-temperature environments.Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines

Typical applications for inconel is seawater applications, aerospace components, chemical processing equipment, nuclear water reaction components.TypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH303

Products Description1, Not scared of moist, no longer terrified of water, can be soaked in water, completely deformed, do now not rust. 2, With a chain power, no deviation, no deformation. 3, The chain board may be based totally on patron requirements of numerous diameter of the round hollow, with the intention to meet the needs of the client's manufacturing.Product Namel stainless steel plateThickness0.1~150mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial200 se

Applications.Chemical industry involving phosphoric acid, sulfuric acid and nitric acid, nuclear fuel reprocessing, nuclear waste treatment, acid washing, petrochemicals, fertilizer manufacturing, pesticide manufacturing, gold extraction, etc. Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm

The C276 alloy (UNS N10276) is used in chemical processing, pollution control, pulp and paper production, industrial and municipal waste disposal, and recovery of "sour" natural gas.

ApplicationWidely used in petroleum,foodstuff,chemical industry,construction, electricProduct Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines, blades, powder and engines，etcFeatureHigh corrosion resistance, low d

Application：Widely used in petroleum,foodstuff,chemical industry,construction, electricProduct Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines, blades, powder and engines，etcFeatureHigh corrosion resistance, low

Alloy A286 features high strength, oxidation resistance, and corrosion resistance at continuously high temperatures. A286 alloys are heat treatable to achieve a wide variety of grain structures and tensile properties. This grade of A286 is annealed and aged. Applications for Alloy A286 include jet engine components, superchargers, turbine wheels and blades, fasteners, springs, and general high-stress components in petrochemical, aerospace, and oil patch industries.DetailsA286 is an iron-nickel-chromium alloy with additions of molybdenum and titanium.