Stainless Steel Butt Weld Elbow-manufacture,factory,supplier from China

Sanitary elbow encyclopediaDepending on your requirements, sanitary elbow  can be austenitic or ferritic, and is defined by being seamless and easy to clean, suitable for pharmaceuticals, food and beverage, and drinking water applications.Introduction of sanitary elbow:Material: 304 material and 316L material are two common materials.Product categories: 90 degree long elbow, 90 degree short elbow, 45 degree short elbow, 45 degree long elbow, 180 degree elbow.Connection method: clamp (quick installation) type, butt welding (welding machine) type, thread (slip knot) type.Standard: 3A, DIN,

Laying points of stainless steel elbow in pipeline:1. In order to reduce the heat loss of the stainless steel elbow and prevent thermal deformation, the buried depth of the pipeline should be greater than 1.2 meters. (calculated from the top of the pipe). The burial depth in alpine regions should be appropriately deepened. At the same time, all pipes should be avoided to be laid below the water table.2. For areas where the groundwater level is high or it is difficult to dig deep for other reasons, measures should be taken as far as possible to avoid water insulators before burying the pipes.

Types of Socket Weld FlangesSocket Weld Raised Face FlangeRaised Faced Socket weld Flanges4 Bolt Socket Weld flange300# Socket Weld FlangeANSI B16.5 Socket weld FlangesSocket weld Flange DimensionsASME B16.5 SWRF FlangesANSI B16.5 Class 150 Socket weld FlangesStainless Steel Socket weld Flanges Suppliers1 inch Socket weld FlangeSocket weld Ring Type Joint FlangesASME B16.47 Series A and B SWRF Flanges2 inch Socket weld Flange3 inch Socket weld FlangeANSI B16.5 class 150 SWRF Flange StockholderANSI 150 Socket weld Flange4 inch Socket weld FlangeHigh Quality SWRF FlangesFlat Face SWRF Flange6 in

Seawater corrosion resistant materials, and widely used in Marine engineering. However, in practical engineering application, the stainless steel connection, especially the welding area, often appears various corrosion damage, resulting in a great loss. Therefore, in this paper, according to the characteristics of seawater corrosion of stainless steel, the seawater corrosion and anticorrosion mechanism of its weld site were comprehensively analyzed and studied.

Features of Flat Welding FlangesWhen welding flat welding flanges, only one side welding is required, and there is no need to weld the inner port of the pipe and flange connection. The welding installation of butt welding flanges requires double-sided welding of the flanges. Therefore, flat welding flanges are generally used for low and medium pressure pipelines, and butt welding flanges are used for the connection of medium and high pressure pipelines. Butt welding flanges are generally at least PN2.5MPa. Butt welding is used to reduce stress concentration.

Material grade: ER70S-6Standard: ASMEIt belongs to copper-plated low-alloy steel gas shielded welding wire. It uses C02 or argon-rich shielding gas for welding. It has excellent welding process performance, stable arc combustion, less spatter, beautiful weld shape, and low sensitivity to weld metal pores. The position welding process is good.

Precautions when installing stainless steel elbows:  1. When installing, the stainless steel elbow can be directly installed on the pipeline according to the connection method, and installed according to the position of use. Under normal circumstances, it can be installed in any position of the pipeline, but it needs to be sealed to prevent leakage and affect the normal operation of the pipeline.2. When the stainless steel elbow ball valve, globe valve and gate valve are used, they are only fully open or fully closed, and should not be used to adjust the flow to avoid sealing.3.

Implementation principleThreaded flange is a kind of non-welded flange, which processes the inner hole of the flange into pipe threads, and is matched with the threaded pipe to realize the connection. Compared with the flat welding flange or the butt welding flange, the threaded flange has the characteristics of convenient installation and maintenance, and can be used on some pipelines where welding is not allowed. Alloy steel flanges have sufficient strength, but are not easy to weld, or the welding performance is not good, and threaded flanges can also be selected.

The appearance of the stamping elbow is fixed. Of course, the appearance of the general stamping elbow is based on the different knowledge of the steel pipe. Therefore, in order to ensure the appearance of the stamping elbow, usually after the steel pipe comes in , If it has not been washed by the rain in the yard, then the stamping elbow is pushed by high temperature, and the appearance of the stamping elbow is generally blue. Of course, if it is washed by the rain, we are heating it through high temperature. , the surface color of the heated stamping elbow is red.

Loose flange: This kind of flange is often used in the case where the medium temperature and pressure are not high and the medium nozzle is highly corrosive. The loose flange is generally used in combination with the flanging short joint, that is, the flange ring is loosely sleeved outside the flanging short joint, the pipe is butt welded with the flanging short joint, and the flange sealing surface is processed on the flanging short joint.In addition, there are flat welding ring and butt welding ring plate loose flange.