Spray Coating-manufacture,factory,supplier from China

317L hexagonal bar can be cold-drawn. For some demanding applications, 4% or more molybdenum in the welding coating of type 317 alloy hex bar is desirable.

In our extensive line of products, we offer stainless steel sheet and stainless steel plates.WHAT IS STAINLESS STEEL SHEET?Stainless steel sheet is typically sold in the annealed condition and is available in most grades. Our stainless steel sheets come in both a standard 2B finish and various polished finishes. Polished surfaces range from the standard #4 to a mirrored finish #8 and are usually covered with a removable vinyl coating. Our standard sheet sizes include 4’ x 8’, 4’ x 10’, and 5’ x 10’, but customized sizes are also available.

2507 Stainless Steel Square Bar2507 stainless steel is used in the oil and gas industry; offshore Shipotian oil platforms (heat exchanger tubes, water treatment and water supply systems, fire protection systems, water spray systems, water stabilization systems; petrochemical equipment; desalination (desalination) equipment (and equipment in high-pressure pipes, seawater pipes); mechanical and structural components that require both high strength and high corrosion resistance; combustion (exhaust) gas purification equipment.

303 stainless steel square bar303 stainless steel square bar is an industrial supply for applications requiring easy cutting and high surface finish.303 stainless metal is austenitic free slicing stainless wear-resistant acid steel. In order to enhance the overall performance of the steel, no extra than 0.60% molybdenum can be delivered to the steel. 303 stainless steel square bar has correct ablation resistance and appropriate reducing and burning resistance.Corrosion resistance.

317l Stainless Steel Square Bar can be categorically said that steel bars are one of the core components of any manufacturing industry or for that matter any industry that relies on machineries.

304 Stainless Square Bar304 Stainless Steel Square Bar has very good formability and can be readily welded by all common methods.

202 Stainless Steel Square Bar are made up of pure alloys which overcome extreme temperature ranges. The manufacturer is providing this stainless steel square bars which are holding exceptional immune to both oxidizing and reducing acids and to stress corrosion cracking and even to localize attach like crevice or pitting corrosion.

Stainless steel 301 Square Bar include 17% chromium and 7% nickel, which give excessive tensile strength as much as 1800mpa. these ss 301 bars are in particular used in plane, rail vehicle additives, and architectural structures.

Alloy 347 Square Bars is stabilized by the additions of chromium and tantalum and offers higher creep and stress rupture properties than Alloy 304 Square Bars and Alloy 304L Square Bars which may also be used for exposures where sensitization and inter-granular corrosion are of concern.Product Parameter：StandardASTM A479,ASTM A276,ASTM A484, ASTM A582, ASME SA276, ASME SA484, GB/T1220, GB4226, etc.Material301, 304, 304L, 309S, 321, 316, 316L, 317, 317L, 310S, 201,202321, 329, 347, 347H

Stainless Steel 317 Square Bars & Rods have excellent yield strength and tensile strength, which is suitable for cold working and annealed condition appliance. It has nickel and low carbon content to provide high formability and excellent corrosion resistance to alkaline compounds. SS 317 Bars & Rods is austenitic stainless steel non-magnetic in nature, less conductivity to electricity, and less brittle at low temperature.

Inconel 617 is known for its use in extreme environments, exhibiting high-temperature strength and oxidation resistance even at temperatures in excess of 1800 degrees Fahrenheit (980 degrees Celsius) as well as excellent corrosion resistance to a variety of corrosive environments. It is the unique properties of the Inconel617 that make it ideal for a wide range of components in the power generation, nuclear, petrochemical, food processing, aerospace, heat treatment and chemical industries.

Alloy 625 exhibits excellent corrosion resistance in many media.

Inconel 825 PipeInconel 825 Pipes are constructed from primary factors like iron, nickel, and chromium, which supply the primary resistance to rusting and pitting in ordinary temperatures. Inconel 825 Pipe has some introduced factors in small parts like molybdenum, titanium, and copper which provides greater substance to the product and will increase its workability even in marine conditions.

Inconel alloys are suited to service in extreme conditions exposed to higher pressure and also kinetic energy because of their oxidation- and then corrosion-resistant properties.

ApplicationThe softened and annealed low carbon alloy 625 is widely used in the chemical process industry.

The machinability of grade 202 stainless steel produces long, gummy chips. Machining can also be performed in the annealed condition. For heat treatment, the material has to be soaked at 1038°C (1900°F) for 30 min and cooled below 16°C (60°F) for full martensite transformation. The material can be welded by common fusion and resistance methods; however, this steel should not be joined using oxyacetylene welding method. The recommended filler metal is AWS E/ER630. Forging can be done by pre-soaking for 1 h at 1177°C (2150°F).

The 304L is a variant of the lower carbon 304 stainless steel for use where welding is required.

1) Test methods.① Tensile test method. Commonly used standard test methods are GB/T228-87, JISZ2201, JISZ2241, ASTMA370, ГОСТ1497, BS18, DIN50145, etc..② Bending test method. Commonly used standard test methods are GB/T232-88, JISZ2204, JISZ2248, ASTME290, ГОСТ14019, DIN50111, etc.(2) performance indicators: the test items to assess the performance of angle steel are mainly tensile test and bending test.

We mainly produce the Carbon and Alloy Steel Flanges, Nickel Alloy Steel Flanges, Stainless Steel Flanges. Here are the main types of the Flanges that we can supply for you.

Stainless steel coil beautiful appearance, good surface quality, suitable for all-weather construction, little influence by climate conditions .The main characteristics of stainless steel coil are: strong corrosion resistance, good surface quality, convenient processing, economic and practical.Product Parameter :Chemical composition and mechanical properties of stainless steel coilsGradeChemical Composition (%)Mechanical PerformanceCSiMnPSNiCrMoHardness201≤0.15≤1.005.5/7.5≤0.060≤0.033.5/5.516.0/18.0-HB≤241,HRB≤100, HV≤240304≤0.08≤1.00≤2.00≤0.045≤0.038.0/11.018.0/20.0-HB≤187,HRB≤90,HV≤200316≤0.

430 Stainless Steel CoilBy some distance the most famous of all straight-chromium stainless steels, Type 430 is the general-purpose alloy of the ferritic class. Referred to as “17 Chrome stainless,” this grade presents favorable resistance to slight atmospheric corrosion and oxidizing environments. Its resistance to corrosion can be superior and reflectivity accelerated with vivid annealing.Type 430 is acknowledged to have reasonable ductility constrained forming, bending and welding traits and can be drawn to a reasonable degree.

430 stainless steel is used for architectural decoration, fuel burner parts, household appliances, and home appliance parts.  430 is a ferritic stainless steel, and 430 16Cr is a representative steel grade of ferritic steel, with good thermal expansion rate, excellent formability and oxidation resistance.

S32750 Welded Pipes are used in offshore platforms, Mechanical and structural components, sea-water piping, Desalination Plants, Heat exchangers and chemical processing industries.Product Parameter：SpecificationSizeOuter Diameter: 6-2500mm (3/8”-100”);Wall Thickness: 1-150mm (SCH10-XXS);Length: As your requestProcessWeldedStandardASTM, DIN, ISO, EN, JIS, GB, etcMaterial200 series: 201,202,202Cu,204Cu,300 series: 301, 303/Cu, 304/L/H, 304Cu, 305, 309/S, 310/S, 316/L/H/Ti, 321/H, 347/H, 330,400 series: 409/L, 410, 416/F, 420/F, 430, 431, 440C, 441, 444, 446,600 series: 13-8ph, 15-5ph, 17-4ph, 17

Threaded 90 Degree ElbowCompany ProfileSince its establishment Tianjin Xinyuan Stainless Steel Co., Ltd. has been steadily seeking progress with the care and support of colleagues and customers from all walks of life, and has developed into a comprehensive enterprise integrating stainless steel material processing and sales agents.Main materials: 201, 301, 304 (0Cr18Ni9), 304L (00Cr19Ni10), 321 (1Cr18Ni9Ti), 316 (0Cr17Ni12Mo2), 316L (00Cr17Ni14Mo2), 309S (0Cr23Ni13), 310S (0Cr25Ni20), 904L (00Cr20Ni25Mo4.5Gu) 316 , 317L, 317H, 304H, (SUS304, 321, 316, 310S, etc.).