ShanDong-manufacture,factory,supplier from China

Laying points of stainless steel elbow in pipeline:1. In order to reduce the heat loss of the stainless steel elbow and prevent thermal deformation, the buried depth of the pipeline should be greater than 1.2 meters. (calculated from the top of the pipe). The burial depth in alpine regions should be appropriately deepened. At the same time, all pipes should be avoided to be laid below the water table.2. For areas where the groundwater level is high or it is difficult to dig deep for other reasons, measures should be taken as far as possible to avoid water insulators before burying the pipes.

Stainless steel surface treatment methods can be roughly divided into five categories, respectively, rolling surface processing, mechanical surface processing, chemical surface processing, reticulated surface processing, color surface processing. Formed products often mirror, drawing, reticulation, etching, electrolytic coloring, coating coloring, etc.

About why wires and cables are twisted:1. Copper wires of different specifications and different numbers are twisted together in a certain arrangement order and laying pitch to become a conductor with a larger diameterThis stranded large-diameter stranded conductor is softer than a single copper wire of the same diameter, and the resulting wire has good bending performance and is not easy to break during a swing test.

Stainless steel panel to support system must be solid, smooth, and easy to change and to ensure that the stainless steel panel installation, hangs Taiwan in the form of design into small units in the form of structural system or by hooking, directly by molding bite or stainless steel plate buckles the connection of the way of implementation and the overall framework and fixed. Curtain wall stainless steel veneer commonly used support system is divided into: plate structure, buckle structure and box structure.

1, structural steel.  In the production, we generally use structural steel and welding structural steel two kinds, they are mainly used in Bridges, vehicles, steel structural parts, ships and other types of production and production.  2, weather resistance steel.  Weather-resistant steels are generally fortified with special elements, such as P, C, Cu, etc., so they have excellent corrosion resistance as well as.  The atmospheric radiation resistance is widely used in all walks of life, such as the production of containers, the manufacture of special vehicles

Stainless steel and nickel are two common materials in numerous industries. Each material has its own set of advantages and disadvantages. In the grand plan of things, it determines which one you consider.What is stainless steel?Stainless steel is a series of alloys with specific carbon and chromium contents.

The appearance of the stamping elbow is fixed. Of course, the appearance of the general stamping elbow is based on the different knowledge of the steel pipe. Therefore, in order to ensure the appearance of the stamping elbow, usually after the steel pipe comes in , If it has not been washed by the rain in the yard, then the stamping elbow is pushed by high temperature, and the appearance of the stamping elbow is generally blue. Of course, if it is washed by the rain, we are heating it through high temperature. , the surface color of the heated stamping elbow is red.

400 series stainless steel is an alloy of iron, carbon and chromium. Because it does not contain nickel, it is a nickel stainless steel, also known as stainless iron. The 400 series stainless steel has normal magnetic properties due to its martensitic structure and iron element.400 series stainless steel has strong resistance to high temperature oxidation. Compared with carbon steel, its physical and mechanical properties are further improved.

Loose flange: This kind of flange is often used in the case where the medium temperature and pressure are not high and the medium nozzle is highly corrosive. The loose flange is generally used in combination with the flanging short joint, that is, the flange ring is loosely sleeved outside the flanging short joint, the pipe is butt welded with the flanging short joint, and the flange sealing surface is processed on the flanging short joint.In addition, there are flat welding ring and butt welding ring plate loose flange.

Implementation principleThreaded flange is a kind of non-welded flange, which processes the inner hole of the flange into pipe threads, and is matched with the threaded pipe to realize the connection. Compared with the flat welding flange or the butt welding flange, the threaded flange has the characteristics of convenient installation and maintenance, and can be used on some pipelines where welding is not allowed. Alloy steel flanges have sufficient strength, but are not easy to weld, or the welding performance is not good, and threaded flanges can also be selected.