N08330 nickel base alloy bar-manufacture,factory,supplier from China

Incoloy 330 is a nickel-ferrichrome austenite alloy.specifically designed for antioxidant and carburizing effects in high-temperature environments.Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines

904L Stainless Steel BarNickel base corrosion resistant alloys have austenite structure. In the state of solid solution and aging treatment, there are intermetallic phases and metal carbonitrides on the austenite matrix and grain boundary of the alloy.Ni Mo alloy is mainly used under the condition of reducing medium corrosion.

C276 Nickel Base Alloy Bar          Hastelloy  C-276    CharacterThe key elements influencing corrosion resistance of this fabric are the control of impurity S,P, gascontent O,N and key factors C,Si, and so forth.It depends on the manage of manufacturing procedure, which include thepreference of heating temperature and heat maintenance time of forging, such as the assure of forgingratio, inclusive of the assure of strong answer remedy, and so on.Product Parameter：2.Chemical compositionCSMnPSNiCrMoFeCoWVMin14.515.04.03.0Max0.010.081.00.040.03Mar

Nickel Base Alloy Plate It should be noted that active metals cannot be used in fluorine-containing environment (for example, Hastelloy C2000, NICU alloy, etc. can be used in hydrofluoric acid environment).Nickel Base Alloy is Active metals ,it also have good corrosion resistance, and the typical representative is Ti; Zr; TA et al; The most typical one is Ti; Titanium material has a wide range of applications, mainly used in some corrosion environments that stainless steel can not adapt to.

This nickel based alloy produced in the form of rounds, squares, hexagons, rectangles as well as Alloy 601 Uns N06601 Cold Finished Bar apart from cold- worked wire, have been covered in the ASTM B166 specification.

Manufacturer Alloy 330 Incoloy 330 nickel alloy sheet/plate/coilTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etcMonel: Monel 400/K500/R405,etcNitronic 40/50/60/7

Inconel 825 Nickel Base Alloy Bar high nickel content ensures resistance to stress corrosion cracking, combined with molybdenum and copper to strongly resist reducing environments such as sulphuric and phosphoric acids, chromium to resist oxidising environments such as nitric acid, titanium to inhibit intergranular corrosion, and overall resistance to pitting and crevice corrosion.Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 8

  The high nickel content of Incoloy 825 gives the alloy an effective resistance to stress corrosion cracking. The corrosion resistance is excellent in a variety of media, such as sulfuric, phosphoric, nitric and organic acids, alkali metals such as sodium hydroxide, potassium hydroxide and hydrochloric acid solutions.

Nickel Base Alloy C276 are tremendous for warmth exchangers inside the chemical processing and nuclear industries. they’re used in steam generator tubing inside the nuclear energy industry, in excessive-temperature aircraft structures, and in oil and fuel extraction packages in which corrosion-, stress- and temperature-resistant tubing is needed.

This alloy has the following properties.1. High resistance to pitting and crevice corrosion in halide media and acidic media containing H2S2. Effective resistance to chloride ion stress corrosion cracking in practical applications3. Excellent corrosion resistance to all kinds of corrosion in the usual oxidizing and reducing environment4. Mechanical properties are improved compared to Cronifer 1925 LC-Alloy 904 L5.

Inconel 625 Nickel Base Alloy PipeInconel 625 demonstrates an extraordinary mixture of corrosion resistance and excessive strength. Due to the excessive nickel content, alloy 625 is immune to chloride-induced stress corrosion cracking. It additionally has appropriate resistance to pitting and crevice corrosion.

Inconel 825 Nickel Base Alloy BarThe excessive nickel content material of Incoloy 825 offers the alloy an fantastic resistance to stress corrosion cracking. The corrosion resistance is gorgeous in a range of media, such as sulfuric, phosphoric, nitric and natural acids, alkali metals such as sodium hydroxide, potassium hydroxide and hydrochloric acid solutions.

G-30 Nickel Base Alloy PipeHastelloy G30 Seamless Pipes is a corrosion resistant alloy of nickel – chromium – molybdenum that is particularly appropriate for use in oxidizing acids. Hastelloy G30 Seamless Tubes is a excessive Nickel primarily based alloy which suggests best corrosion resistance over most different Nickel and Iron based totally alloys in phosphoric acids as properly as many complicated environments containing incredibly oxidising acids such as nitric, hydrofluoric and sulphuric.

Incoloy 925 Nickel Base Alloy PipeThis is an age-hardenable Nickel primarily based alloy containing Iron and Chromium as primary additions, and additionally additions of Molybdenum, Copper, Titanium and Aluminum. A mixture of excessive electricity and corrosion resistance make it appropriate in functions such as valves, hangers, packers, and tubular, in bitter fuel environments. It can additionally be used for fasteners, and for pump shafts working inside marine environments.The mixture of Nickel and Chromium renders safety in each oxidizing and lowering atmospheres.

Alloy B-2 is a nickel-molybdenum alloy with significant resistance to reducing environments, such as hydrogen chloride gas and sulphuric, acetic and phosphoric acids. Hastelloy® B-2 provides resistance to pure sulphuric acid and a number of non-oxidizing acids. The alloy should not be used in oxidizing media or where oxidizing contaminants are available in reducing media.

Alloy 625 exhibits excellent corrosion resistance in many media.

Corrosion resistance of inconel 601 alloy:An important property of alloy 601 is its resistance to oxidation at temperatures up to 1180°C. Even under very severe conditions, such as heating and cooling cycles, 601 generates a dense oxide film to achieve high resistance to spalling. Even under severe conditions, such as heating and cooling cycles, 601 can generate a dense oxide film to obtain high resistance to flaking. 601 has good resistance to carbonization.

Chemical composition of Incoloy926 nickel base alloyThe content of Cr in nickel-based alloys is usually 14.0-18.0% and the content of nickel is 24.0-26.0%.

600 alloy (UNS NO6600) The alloy is widely used in the chemical industry for its strength and corrosion resistance. Applications include heaters, stills, bubbles and condensers for fatty acid processing; Evaporator tubes, segments and spalling pans for the manufacture of sodium sulfide; And equipment for processing plants.

Bars are the most common raw material used by industries in various shapes and sizes, one such shape of the bar is Alloy 926 Round Bar. The most common shapes of Bars are Alloy 926 Round Bar, Alloy 926 Square Bar, Alloy 926 Rectangle Bar, and Alloy 926 Hex Bar.

Inconel 600 Nickel Base Alloy PipeInconel 600 alloy is a nickel-chromium-iron-based strong answer bolstered alloy. It has accurate excessive temperature corrosion and oxidation resistance, extremely good bloodless and warm processing and welding properties, and has exceptional thermal energy and excessive plasticity under 700°C.Inconel 600 alloy can be reinforced with the aid of bloodless working, and it can also be related via resistance welding, soften welding or brazing.

Nickel - base corrosion - resistant alloys mostly have austenite structure.  There are intermetallic phases and metal carbonitrides in austenite matrix and grain boundary of alloy under solution and aging treatment.  Product Parameter：Product NameChina Factory Supplier Nickel Based Alloy Steel Astm B444 Uns N06625 Inconel 625 Din2.4856 Alloy 625 Steel Pipe TubeStandardGB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 316Ti / 316LN / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / XM-19 / S31803 /S32750 / S32205 / F50 / F60 / F55 / F60 / F61 / F65 e

The Incoloy 901 Nickel Base Alloy Pipe content makes it have better oxidation resistance than standard 18-8 stainless steel, and its oxidation resistance is no less than that of higher grade alloys with temperatures up to 1900 ° f (1038 ° c).1. Fire control system, seawater purification system, hydraulic pressure and perfusion piping system in ocean engineering.2, cellulose pulp production in the bleaching pool.3. Polished rods in corrosive oil Wells.4. Hose system in ocean engineering.5. Pipelines, joints and airflow systems in acid gas production.6.

This kind of material with high formability, many is given priority to with brocade alloy are more likely to be welded.