Inconel 601 Nickel Base Alloy Bar-manufacture,factory,supplier from China

Corrosion resistance of inconel 601 alloy:An important property of alloy 601 is its resistance to oxidation at temperatures up to 1180°C. Even under very severe conditions, such as heating and cooling cycles, 601 generates a dense oxide film to achieve high resistance to spalling. Even under severe conditions, such as heating and cooling cycles, 601 can generate a dense oxide film to obtain high resistance to flaking. 601 has good resistance to carbonization.

This nickel based alloy produced in the form of rounds, squares, hexagons, rectangles as well as Alloy 601 Uns N06601 Cold Finished Bar apart from cold- worked wire, have been covered in the ASTM B166 specification.

Inconel 601 Seamless PipeThe performance characteristics of Inconel601 are better than 600. It is an alloy with high chromium content. It has excellent oxidation and corrosion resistance. Because the composition also contains aluminum, it has good oxidation resistance and curing performance.

Inconel alloys are suited to service in extreme conditions exposed to higher pressure and also kinetic energy because of their oxidation- and then corrosion-resistant properties.

Inconel 825 Nickel Base Alloy Bar high nickel content ensures resistance to stress corrosion cracking, combined with molybdenum and copper to strongly resist reducing environments such as sulphuric and phosphoric acids, chromium to resist oxidising environments such as nitric acid, titanium to inhibit intergranular corrosion, and overall resistance to pitting and crevice corrosion.Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 8

Inconel 617 corrosion and heat resistance.Inconel 617 alloy has good corrosion resistance in thermally corrosive areas such as sulfide environments, especially oxidizing and carbonizing environments that cycle up to 1100°C.

Typical applications for inconel is seawater applications, aerospace components, chemical processing equipment, nuclear water reaction components.TypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH303

Inconel 625 Nickel Base Alloy PipeInconel 625 demonstrates an extraordinary mixture of corrosion resistance and excessive strength. Due to the excessive nickel content, alloy 625 is immune to chloride-induced stress corrosion cracking. It additionally has appropriate resistance to pitting and crevice corrosion.

Inconel 825 Nickel Base Alloy BarThe excessive nickel content material of Incoloy 825 offers the alloy an fantastic resistance to stress corrosion cracking. The corrosion resistance is gorgeous in a range of media, such as sulfuric, phosphoric, nitric and natural acids, alkali metals such as sodium hydroxide, potassium hydroxide and hydrochloric acid solutions.

Alloy Inconel 625 is a low-carbon nickel-chromium-molybdenum alloy with excellent breadability to various corrosive media, non-magnetic; good strength, toughness and excellent fatigue resistance in environments ranging from low temperatures to 1093°C (2000°F), thanks to the low carbon content and solid solution treatmentTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy:

Incoloy 330 is a nickel-ferrichrome austenite alloy.specifically designed for antioxidant and carburizing effects in high-temperature environments.Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines

Alloy 625 (UNS NO6625) is used in combustion system transition bushings, propeller blades, seals, fasteners, pumps, turbine rings, heat exchanger tubes, reaction vessels, distillation towers, heat exchangers and valves.Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)

HASTELLOY C-2000 The most versatile performanceCorrosion-resistant alloy with excellent uniform corrosion resistance in both oxidizing and reducing environments.Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turb

Alloy 625 exhibits excellent corrosion resistance in many media.

Inconel 600 Nickel Base Alloy PipeInconel 600 alloy is a nickel-chromium-iron-based strong answer bolstered alloy. It has accurate excessive temperature corrosion and oxidation resistance, extremely good bloodless and warm processing and welding properties, and has exceptional thermal energy and excessive plasticity under 700°C.Inconel 600 alloy can be reinforced with the aid of bloodless working, and it can also be related via resistance welding, soften welding or brazing.

Inconel nickel base alloy 600 625 706 725 seamless hastelloy pipeProduct Parameter：Product NameChina Factory Supplier Nickel Based Alloy Steel Astm B444 Uns N06625 Inconel 625 Din2.4856 Alloy 625 Steel Pipe TubeStandardGB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 316Ti / 316LN / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / XM-19 / S31803 /S32750 / S32205 / F50 / F60 / F55 / F60 / F61 / F65 etcMonel 400 / Monel K-500Inconel 600 / Inconel 601 / Inconel 625 / Inconel 617 / Inconel 690 / Inconel 718 / Inconel X-750Incoloy A-286 / Incoloy 800 / Incoloy 800H / Incol

ApplicationWidely used in petroleum,foodstuff,chemical industry,construction, electricProduct Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines, blades, powder and engines，etcFeatureHigh corrosion resistance, low d

Application：Widely used in petroleum,foodstuff,chemical industry,construction, electricProduct Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines, blades, powder and engines，etcFeatureHigh corrosion resistance, low

Alloy 400 (UNS N04400) is a single-phase solid-solution nickel-copper alloy with excellent corrosion resistance to a wide range of media.Product Parameter：Prdouct NameNickel Alloy BarGradeHastelloy: Hastelloy B / B-2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N;Inconel: Inconel 100/600/601/602CA/617/625713/718738/X-750,Carpenter 20;Incoloy: Incoloy 800/800H/800HT/825/925/926;Monel: Monel 400/K500Nimonic: Nimonic 75/80A/90 ;OuterDiameter (OD)Peeling Bar: 16~180mmCold Drawn Bar: 4.76~120mm (All sizes can be customized)Forged Bar: 180~400mmLengthCustomizedApplicationAuto, turbines, blades, powder and

Inconel Nickel Base Alloy Pipe Nickel-based alloys are used in many fields, such as:  1. Ocean: Marine construction of Marine environment, seawater desalination, mariculture, seawater heat exchange, etc.  2, environmental protection: thermal power plant flue gas desulfurization device, wastewater treatment, etc.  3. Energy: nuclear power generation, comprehensive utilization of coal, tidal power generation, etc.  4. Petrochemical industry: refining, chemical and chemical equipment, etc.  5.

Inconel 617 Pipe & other nickel based alloys from these ranges are ideal for cost-effective manufacture of pumps, valves and process control equipment in oil and gas extraction.Product Parameter：Product NameChina Factory Supplier Nickel Based Alloy Steel Astm B444 Uns N06625 Inconel 625 Din2.4856 Alloy 625 Steel Pipe TubeStandardGB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 316Ti / 316LN / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / XM-19 / S31803 /S32750 / S32205 / F50 / F60 / F55 / F60 / F61 / F65 etcMonel 400 / Monel K-500Inconel 600 / Inconel 601 / Inc

Outer diameter :10.3mm-406.4mm Wall thickness :1.24mm-40.49mmLength: usually fixed length 6m, according to customer requirementsProduct Parameter：Product NameChina Factory Supplier Nickel Based Alloy Steel Astm B444 Uns N06625 Inconel 625 Din2.4856 Alloy 625 Steel Pipe TubeStandardGB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 316Ti / 316LN / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / XM-19 / S31803 /S32750 / S32205 / F50 / F60 / F55 / F60 / F61 / F65 etcMonel 400 / Monel K-500Inconel 600 / Inconel 601 / Inconel 625 / Inconel 617 / Inconel 690 / Inconel 718 /

904L Stainless Steel BarNickel base corrosion resistant alloys have austenite structure. In the state of solid solution and aging treatment, there are intermetallic phases and metal carbonitrides on the austenite matrix and grain boundary of the alloy.Ni Mo alloy is mainly used under the condition of reducing medium corrosion.

Product Parameter：Product NameChina Factory Supplier Nickel Based Alloy Steel Astm B444 Uns N06625 Inconel 625 Din2.4856 Alloy 625 Steel Pipe TubeStandardGB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 316Ti / 316LN / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / XM-19 / S31803 /S32750 / S32205 / F50 / F60 / F55 / F60 / F61 / F65 etcMonel 400 / Monel K-500Inconel 600/ Inconel 601 / Inconel 625 / Inconel 617 / Inconel 690 / Inconel 718 / Inconel X-750Incoloy A-286 / Incoloy 800 / Incoloy 800H / Incoloy 800HTIncoloy 825 / Incoloy 901 / Incoloy 925 / Incoloy 926Nimon