forged flange-manufacture,factory,supplier from China

Implementation principleThreaded flange is a kind of non-welded flange, which processes the inner hole of the flange into pipe threads, and is matched with the threaded pipe to realize the connection. Compared with the flat welding flange or the butt welding flange, the threaded flange has the characteristics of convenient installation and maintenance, and can be used on some pipelines where welding is not allowed. Alloy steel flanges have sufficient strength, but are not easy to weld, or the welding performance is not good, and threaded flanges can also be selected.

Types of Socket Weld FlangesSocket Weld Raised Face FlangeRaised Faced Socket weld Flanges4 Bolt Socket Weld flange300# Socket Weld FlangeANSI B16.5 Socket weld FlangesSocket weld Flange DimensionsASME B16.5 SWRF FlangesANSI B16.5 Class 150 Socket weld FlangesStainless Steel Socket weld Flanges Suppliers1 inch Socket weld FlangeSocket weld Ring Type Joint FlangesASME B16.47 Series A and B SWRF Flanges2 inch Socket weld Flange3 inch Socket weld FlangeANSI B16.5 class 150 SWRF Flange StockholderANSI 150 Socket weld Flange4 inch Socket weld FlangeHigh Quality SWRF FlangesFlat Face SWRF Flange6 in

Loose flange: This kind of flange is often used in the case where the medium temperature and pressure are not high and the medium nozzle is highly corrosive. The loose flange is generally used in combination with the flanging short joint, that is, the flange ring is loosely sleeved outside the flanging short joint, the pipe is butt welded with the flanging short joint, and the flange sealing surface is processed on the flanging short joint.In addition, there are flat welding ring and butt welding ring plate loose flange.

Structural features:Threaded flanges manufactured in accordance with ASME B16.5 are similar to sliding flanges, but the holes shall have tapered pipe threads in accordance with ASME b1.20.1. The thread shall be concentric with the axis of the flange opening, and the alignment deviation (perpendicular to the flange face) shall not exceed 5mm per meter. Threaded flanges are NPs 1 / 2 to NPs 24 in size and pressure classes are 150, 300, 400, 600 and 900. The sizes of class 1500 and 2500 are NPs 1 / 2 to NPs 2 - 1 / 2.Class 150 threaded flange has no counterbore.

Features of Flat Welding FlangesWhen welding flat welding flanges, only one side welding is required, and there is no need to weld the inner port of the pipe and flange connection. The welding installation of butt welding flanges requires double-sided welding of the flanges. Therefore, flat welding flanges are generally used for low and medium pressure pipelines, and butt welding flanges are used for the connection of medium and high pressure pipelines. Butt welding flanges are generally at least PN2.5MPa. Butt welding is used to reduce stress concentration.

Specification of stainless steel rod: From 1.0mm to 250mm size (diameter, side length, thickness oropposite side distance) not more than 250mm hot rolled and forged stainless steel rod.  Stainless steel rod material: 304, 304L, 321, 316, 316L, 310S, 630, 1Cr13, 2Cr13, 3Cr13, 1Cr17Ni2, duplex steel, antibacterial steel and other materials! Stainless steel rod has broad application prospects, is widely used in hardware kitchenware, shipbuilding, petrochemical, machinery, medicine, food, electric power, energy, building decoration, nuclear power, aerospace, military industry and ot

The 2mm thick braided stainless steel plate is made of austenitic SUS316 stainless steel, and the partition is mostly 500mm x 4500mm. The panel is fixed to the aluminum alloy subframe by tapping nails, and then assembled by the aluminum alloy subframe and the unit mullister to form a stainless steel unit system. The calculation of the panel support system is analyzed according to the large deformation theory.

Stainless steel is initially by British scientists Henry cabral, doing research on the improvement of weapons found and the stainless steel in which the research has a strong dirt, acid resistance, corrosion resistance, wear resistance, no radioactive environmental products in developed some stainless steel products to pop up to now and slowly instead of the other material products.From material selection to molding, the stainless steel products cast by us have gone through 33 years of process processing. The surface technology adopts stainless steel primary color mirror polishing.

Laying points of stainless steel elbow in pipeline:1. In order to reduce the heat loss of the stainless steel elbow and prevent thermal deformation, the buried depth of the pipeline should be greater than 1.2 meters. (calculated from the top of the pipe). The burial depth in alpine regions should be appropriately deepened. At the same time, all pipes should be avoided to be laid below the water table.2. For areas where the groundwater level is high or it is difficult to dig deep for other reasons, measures should be taken as far as possible to avoid water insulators before burying the pipes.

Stainless steel profile and flat steel made in ChinaStainless steel profile belongs to a kind of stainless steel profile, its shape can be divided into many kinds, the most common for Angle steel, flat steel, channel steel and so on.       Stainless steel flat is rectangular steel with slightly pure edges. Stainless steel flat steel can be semi-finished steel. There are cold drawn polished stainless steel flat and hot rolled acid white sandblasted stainless steel flat.Mainly divided into equilateral and unequal two categories, equilateral also known as stainless s