duplex stainless steel standards-manufacture,factory,supplier from China

254SMO is an austenitic stainless steel.  Because of its high molybdenum content, it has very high resistance to spot corrosion and crevice corrosion. Main ingredients:254 smo carbon (C) 0.02 or less, manganese (Mn) of 1.00 or less, nickel (Ni) 17.5 ~ 18.5, silicon (Si) of 0.8 or less phosphorus (P) of 0.03 or less, sulfur (S) of 0.01 or less, chromium (Cr) 19.5 ~ 20.5, copper (Cu) 0.5 ~ 1.0, molybdenum (Mo) 6.0 ~ 6.5  National standards: UNS S31254, DIN/EN 1.4547, ASTM A280, ASME SA-240  Welding material: ERNiCrMo-3 wire, ENiCrMo-3 electrode Product Name254smo st

Products Description1, Health type, fully meet the requirements of food grade standards 2, High temperature resistance, the maximum temperature of 1250 degrees. 3,Not afraid of wet, not afraid of water, can be soaked in water, completely deformed, do not rust. Product Namel stainless steel plateThickness0.1~150mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial200 series: 201/202300 series: 301/304/304L/305/309S/310S/316/316L/316LN/316Ti/317/317L/347/347H400 serie

Features and Benefits• Made from silver-coloured 304S15 stainless steel• Length of 300 mm• Width of 300 mm• Thickness of 1 mm• Density of 8 g/cm³• Hardness 92 HB• Thermal conductivity of 16.2 W/m at +100°C• Tensile strength of 520 Mpa• RoHS (Restriction of Hazardous Substances) compliant• Meets standards BS1449 pt 2 and BSEN 10088-2 for steel plate, sheet and strip• Comes without adhesive backingSpecificationsAttributeValueLength300mmMaterial304S15 Stainless SteelFormSolidWidth300mmThickness1mmDensity8g/cm³Hardness92 HBColourSilverThermal Conductivity16.2 W/m at 100°cAdhesive BackingNoTensile

Being an expert in manufacturer, suppliers and stockists 329 Duplex Stainless Steel Round Bar. Ensure the best quality, which is in compliance with international quality standards as our in-house manufacturer 329 Duplex Stainless Steel Round Bar unit is equipped with advanced machinery to check the quality. The primary feature of this 329 Duplex Stainless Steel Round Bar is it has very longer service life duration with operational convenience and safety.

Stainless steel coil is one of the most popular raw materials in construction and manufacturing. Because of its unique mechanical and physical properties, stainless steel coils have been widely used in the production of kitchen appliances and industrial equipment. They are rugged, corrosion resistant, lightweight and require low maintenance. In addition, they are flexible and easy to meet the requirements of a series of design standards. In industry (especially in manufacturing), many grades of stainless steel coils can be found, each with different performance and availability.

Stainless steel coil is one of the most popular raw materials in construction and manufacturing. Because of its unique mechanical and physical properties, stainless steel coils have been widely used in the production of kitchen appliances and industrial equipment. They are rugged, corrosion resistant, lightweight and require low maintenance. In addition, they are flexible and easy to meet the requirements of a series of design standards. In industry (especially in manufacturing), many grades of stainless steel coils can be found, each with different performance and availability.

Duplex stainless steel tube has good welding performance, compared with ferritic stainless steel and austenitic stainless steel, it is not like the welding heat affected zone of ferritic stainless steel, because of the severe coarsing grain and the plastic toughness is greatly reduced, nor like austenitic stainless steel, is more sensitive to welding hot crack.Because of its special advantages, duplex stainless steel is widely used in petrochemical equipment, seawater and wastewater treatment equipment, oil and gas pipelines, papermaking machinery and other industrial fields.

The main feature is that the yield strength can reach 400-550mpa, which is 2 times of ordinary stainless steel, so it can save material and reduce the cost of equipment manufacturing.

We make use of hundred percent pure raw materials for manufacturing Duplex S31803 Coils that results in the production of high quality of goods. Duplex 31803 Coils has a huge number of applications in various industries. These coils are used in the manufacturing of the piping and tubing in the oils and gas exploration industries and are also used in the manufacturing of food processing equipment.

The Duplex 2205 Stainless Steel Plate is 3% molybdenum, 22% chromium, 5-6% nickel alloyed stainless steel plate, with high-stress resistance characteristics, high strength, and excellent resistance to impact.Product ShowProducts DescriptionProduct Namestainless steel plateThickness0.1~150mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial 200 series: 201/202  300 series: 301/304/304L/305/309S/310S/316/316L/316LN/316Ti/317/317L/347/347H 400 series: 405/40

AISI 329 Duplex Stainless Steel Plate belongs to a specification of duplex steel grades.

2205 duplex stainless steel Pipe SpecificationItemStainless Steel Tube/PipeSteel grade200series,300 series,400series,duplexStandardASTM A213,A312,ASTM A269,ASTM A778,ASTM A789,DIN 17456,DIN17457,DIN 17459,JIS G3459,JIS G3463,GOST9941,EN10216,BS3605,GB13296Material304,304L,309S,310S,316,316Ti,317,317L,321,347,347H,304N,316L, 316N,201,202,2205,2507,904lSurfacePolishing,annealing,pickling,brightTypehot rolled and cold rolledstainless steel round pipe/tubeSizeWall thickness1mm-150mm(SCH10-XXS)Outer diameter6mm-2500mm (3/8"-100")stainless steel square pipe/tubeSizeWall thickness1mm-150mm(

Duplex 2304 is a 23% chromium, 4% nickel, molybdenum-free duplex stainless steel whose structure is a balance of ferritic and austenitic.

Astm A790 Super Duplex 2507 Stainless Steel PipesProduct DescriptionThe chemical composition is :carbon C≤0.15manganese Mn≤1.25silicon Si≤1.00chromium Cr12.0~14.0nickel Ni≤0.60%phosphorus P≤0.06sulfur S≤0.15Molybdenum≤0.60%Product DescriptionProductAstm A790 Super Duplex 2507 Stainless Steel PipesSurface FinishBA, 2B, 2D, 4K, 6K, 8K, NO.4, HL, EmbossedTechniqueHot Rolled / Cold RolledStandardGB JIS ASTM ASME ENSteel Grade200 series: 201 202300 series: 301 304 304L 309 310 310s 316 316L 321400 series: 409 410 410S 420 430ColorStandard RAL color:red,bule,white,grey,brick,etc.Stock Dimension0.5mm

2304 Duplex Stainless Steel PlateDuplex 2304 is a 23% chromium, 4% nickel, molybdenum-free duplex stainless metal whose shape is a stability of ferritic and austenitic. It has common corrosion resistance comparable or higher than Alloys 304L and 316L however with yield energy almost double that of austenitic stainless steels.

2205 Duplex Stainless Steel PlateDuplex 2205 is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. It is the most widely used duplex stainless steel grade and is characterized by high yield strength, double that of the standard austenitic stainless steel grades.

329 is a duplex stainless steel with optimized S and Mo to improve mechanical properties.

1. Compared with 316L and 317L austenitic stainless steel,2205 alloy has better performance in corrosion resistance and crack corrosion, it has high corrosion resistance, compared with austenite, its thermal expansion coefficient is lower, higher thermal conductivity.2. Compared with austenitic stainless steel, the compressive strength of duplex stainless steel 2205 alloy is twice that of austenitic stainless steel. Compared with 316L and 317L, the designer can reduce its weight.

2304 duplex stainless steel bar:Stainless steel is a production which not easy rust, acid resistance and corrosion resistance, so it is widely used in light industry, heavy industry, daily necessities and the decoration industry.

Features of STAINLESS STEEL PipeOuter Diameter10-2000mm or as customer's requirementsThickness0.1-100mm or as customer's requirementsLength1000-12000mm or as requirementsSurfaceN0.1, N0.4, 2D, 2B, HL, BA, 6K, 8K, Mirror,etcMaterial201,202,301,302,303,304,304L,304N1,309S,310S,316,316L,316Ti,316N,317,317L,321,409L,410,420,430,904,904L,etcGrade200/300/400/500/600/700/800/900 series/duplex stainless steelStandardsAISI ASTM JIS SUS DIN GBCertificationsISO 9001 and SGSPackingIndustry standard packaging or according to client's requirementBrandTISCO,ZPSS,Baosteel,POSCO,LISCO,YUSCO,Ansteel

2507 (UNS S32750) duplex stainless steel has strong strength and corrosion resistance, which is mainly used in chemical processing, petrochemical industry and subsea equipment. It has strong chloride corrosion resistance, high thermal conductivity and low coefficient of thermal expansion. The high content of chromium, molybdenum and nitrogen makes it highly resistant to patchy, crevice and general corrosion.

Stainless steel plate is detection and shaping have to be off-line processing.

s31803 Duplex stainless steel is a kind of  Medium alloy stainless steel,it's PREN value is 32-33, and its corrosion resistance is between AISI 316L and 6%Mo+N austenitic stainless steel.Duplex stainless steel has the characteristics of both austenitic stainless steel and ferritic stainless steel because it has austenite + ferrite dual-phase structure, and the content of the two phase structures is basically the same. The yield strength can reach 400Mpa ~ 550MPa, which is twice that of ordinary austenitic stainless steel.

Super Duplex Steel UNS S32760 Welded Pipes are multi-purpose and possess good weldability, used widely in the offshore and marine industry for their acid corrosion resistance.S32760 Super Duplex Stainless Steel Pipes are highly alloyed with different metals and have a greater mechanical strength.