Duplex 32205-manufacture,factory,supplier from China

Duplex Steel UNS S32205 Round Bars have a long service life and low maintenance cost and hence can be used in various industrial applications like oil and gas exploration and processing equipment, chemical and petrochemical processing equipment, high chloride and marine environments, power generation, specialty chemicals, gas processing, seawater equipment, pulp and paper digesters, etc.Product Parameter：Stainless Steel barMaterial200 series: 201,202,202Cu,204Cu,300 series: 301, 303/Cu, 304/L/H, 304Cu, 305, 309/S, 310/S, 316/L/H/Ti, 321/H, 347/H, 330,400 series: 409/L, 410, 416/F, 420/F, 430,

We make use of hundred percent pure raw materials for manufacturing Duplex S31803 Coils that results in the production of high quality of goods. Duplex 31803 Coils has a huge number of applications in various industries. These coils are used in the manufacturing of the piping and tubing in the oils and gas exploration industries and are also used in the manufacturing of food processing equipment.

Duplex stainless steel tube has good welding performance, compared with ferritic stainless steel and austenitic stainless steel, it is not like the welding heat affected zone of ferritic stainless steel, because of the severe coarsing grain and the plastic toughness is greatly reduced, nor like austenitic stainless steel, is more sensitive to welding hot crack.Because of its special advantages, duplex stainless steel is widely used in petrochemical equipment, seawater and wastewater treatment equipment, oil and gas pipelines, papermaking machinery and other industrial fields.

The Duplex 2205 Stainless Steel Plate is 3% molybdenum, 22% chromium, 5-6% nickel alloyed stainless steel plate, with high-stress resistance characteristics, high strength, and excellent resistance to impact.Product ShowProducts DescriptionProduct Namestainless steel plateThickness0.1~150mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial 200 series: 201/202  300 series: 301/304/304L/305/309S/310S/316/316L/316LN/316Ti/317/317L/347/347H 400 series: 405/40

Duplex 2205 PlateDuplex 2205 Plate is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. Duplex 2205 Plate is the most broadly used duplex stainless metal grade and is characterised via excessive yield strength, double that of the standard austenitic stainless steel grades.

Astm A790 Super Duplex 2507 Stainless Steel PipesProduct DescriptionThe chemical composition is :carbon C≤0.15manganese Mn≤1.25silicon Si≤1.00chromium Cr12.0~14.0nickel Ni≤0.60%phosphorus P≤0.06sulfur S≤0.15Molybdenum≤0.60%Product DescriptionProductAstm A790 Super Duplex 2507 Stainless Steel PipesSurface FinishBA, 2B, 2D, 4K, 6K, 8K, NO.4, HL, EmbossedTechniqueHot Rolled / Cold RolledStandardGB JIS ASTM ASME ENSteel Grade200 series: 201 202300 series: 301 304 304L 309 310 310s 316 316L 321400 series: 409 410 410S 420 430ColorStandard RAL color:red,bule,white,grey,brick,etc.Stock Dimension0.5mm

The main feature is that the yield strength can reach 400-550mpa, which is 2 times of ordinary stainless steel, so it can save material and reduce the cost of equipment manufacturing.

duplex 2205 flangesDuplex 2205 flanges are made from an austenitic-ferritic stainless steel, which was once designed to supply greater power and corrosion resistance than 300 sequence stainless steels. It helps customers to keep away from stress corrosion cracking that is normally viewed with 316 and 317.

Super Duplex Steel UNS S32760 Welded Pipes are multi-purpose and possess good weldability, used widely in the offshore and marine industry for their acid corrosion resistance.S32760 Super Duplex Stainless Steel Pipes are highly alloyed with different metals and have a greater mechanical strength.

AISI 329 Duplex Stainless Steel Plate belongs to a specification of duplex steel grades.

2304 Duplex Stainless Steel PlateDuplex 2304 is a 23% chromium, 4% nickel, molybdenum-free duplex stainless metal whose shape is a stability of ferritic and austenitic. It has common corrosion resistance comparable or higher than Alloys 304L and 316L however with yield energy almost double that of austenitic stainless steels.

Duplex 2304 is a 23% chromium, 4% nickel, molybdenum-free duplex stainless steel whose structure is a balance of ferritic and austenitic.

Super Duplex 2507 PipeSuper Duplex 2507 Pipe is a exquisite duplex cloth made steel pipe. The high-quality duplex is an alloy of chromium, molybdenum and nickel. The fabric has very excessive corrosion resistance houses and is resistant to pitting corrosion, crevice corrosion and uniform corrosion as well. The Alloy 2507 Seamless Pipes are produced via a technique referred to as the cold drawing. Cold drawn pipes are seamless or have clean surfaces. They are proper to be used in aesthetic searching and unique applications.

Duplex 2304 is two-phase, ferritic, austenitic which contain chromium 23%,nickel 4%, molybdenum-free duplex stainless steel. Itscorrosion resistance properties are similar to 316L stainless steel. Furthemore it has mechanical properties twice to 304L stainless steel/316Lstainless steel grades. And this becomes helpful for the manufacturers to save weight especially for properly designed pressure vessel applications.

Duplex 2205 PipeThe yield power of 2205 duplex stainless metal is greater than double that of everyday austenitic stainless steel, which approves designers to sketch merchandise with decreased weight and offers this alloy a rate gain over 316,317L. This alloy is in particular appropriate for temperatures in the -50°F/+600°F range. Applications past this temperature vary may also additionally reflect onconsideration on the alloy, however there are some limitations, mainly when utilized to welded structures.Product ParameterSize4 to 219mm W.

329 is a duplex stainless steel with optimized S and Mo to improve mechanical properties.

2205 duplex stainless steel Pipe SpecificationItemStainless Steel Tube/PipeSteel grade200series,300 series,400series,duplexStandardASTM A213,A312,ASTM A269,ASTM A778,ASTM A789,DIN 17456,DIN17457,DIN 17459,JIS G3459,JIS G3463,GOST9941,EN10216,BS3605,GB13296Material304,304L,309S,310S,316,316Ti,317,317L,321,347,347H,304N,316L, 316N,201,202,2205,2507,904lSurfacePolishing,annealing,pickling,brightTypehot rolled and cold rolledstainless steel round pipe/tubeSizeWall thickness1mm-150mm(SCH10-XXS)Outer diameter6mm-2500mm (3/8"-100")stainless steel square pipe/tubeSizeWall thickness1mm-150mm(

2507 Super Duplex Stainless Steel BarsAlloy 2507 is a duplex stainless steel, a super duplex stainless steel composed of 25% chromium, 4% molybdenum and 7% nickel.Main components: 25Cr-7Ni-4Mo-0.27N2507 is a ferritic-austenitic (duplex) stainless steel, also called duplex stainless steel, which has excellent resistance to pitting, crevice corrosion and uniform corrosion.Application areas: pulp and paper industry, seawater desalination, flue gas purification, heat exchangers, chemical tanker piping systems, seawater systems, etc.Product Parameter：Equivalent MaterialsSAF2507, EN 1.4410, UNS S327

2304 duplex stainless steel bar:Stainless steel is a production which not easy rust, acid resistance and corrosion resistance, so it is widely used in light industry, heavy industry, daily necessities and the decoration industry.

2205 Duplex Stainless Steel PlateDuplex 2205 is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. It is the most widely used duplex stainless steel grade and is characterized by high yield strength, double that of the standard austenitic stainless steel grades.

Duplex 2507 Stainless Steel PlateAlloy 2507 is a super duplex stainless steel with 25% chromium, 4% molybdenum, and 7% nickel designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment. The steel has excellent resistance to chloride stress corrosion cracking, high thermal conductivity and a low coefficient of thermal expansion.

Super Duplex Stainless Steel S32750 Round bars contain chromium, molybdenum and nitrogen additions that are resistant to localised corrosion, such as pitting and crevice attack. Product Parameter：Stainless Steel barMaterial200 series: 201,202,202Cu,204Cu,300 series: 301, 303/Cu, 304/L/H, 304Cu, 305, 309/S, 310/S, 316/L/H/Ti, 321/H, 347/H, 330,400 series: 409/L, 410, 416/F, 420/F, 430, 431, 440C, 441, 444, 446,600 series: 13-8ph, 15-5ph, 17-4ph, 17-7ph(630,631), 660A/B/C/D,Duplex: 2205(UNSS31803/S32205), 2507(UNSS32750), UNSS32760, 2304, LDX2101.

LDX 2101* is a duplex (austenitic-ferritic) stainless steel with relatively low contents of alloying elements. The grade has high mechanical strength, similar to that of other duplex grades. Its good corrosion resistance is on par with that of most standard stainless steel grades.

Due to its special advantages, duplex stainless steel is widely used in petrochemical equipment, seawater and wastewater treatment equipment, oil and gas pipelines, papermaking machinery and other industrial fields.