Duplex 2205 Flanges-manufacture,factory,supplier from China

duplex 2205 flangesDuplex 2205 flanges are made from an austenitic-ferritic stainless steel, which was once designed to supply greater power and corrosion resistance than 300 sequence stainless steels. It helps customers to keep away from stress corrosion cracking that is normally viewed with 316 and 317.

Pipe flanges connect pipes, valves, pumps and other equipment in a piping system. Flanges are usually welded or screwed into the systems and then joined with bolts. The eight types of pipe flanges are available in round, square and rectangular shapes.Blind FlangesA blind, or blanking, flange is a round plate with no center hold (but with bolt holes) that closes the ends of piping systems.Lap Joint FlangesPiping fitted with lapped pipe or with lap joint stub ends often use lap joint flanges.

1. Compared with 316L and 317L austenitic stainless steel,2205 alloy has better performance in corrosion resistance and crack corrosion, it has high corrosion resistance, compared with austenite, its thermal expansion coefficient is lower, higher thermal conductivity.2. Compared with austenitic stainless steel, the compressive strength of duplex stainless steel 2205 alloy is twice that of austenitic stainless steel. Compared with 316L and 317L, the designer can reduce its weight.

The Duplex 2205 Stainless Steel Plate is 3% molybdenum, 22% chromium, 5-6% nickel alloyed stainless steel plate, with high-stress resistance characteristics, high strength, and excellent resistance to impact.Product ShowProducts DescriptionProduct Namestainless steel plateThickness0.1~150mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial 200 series: 201/202  300 series: 301/304/304L/305/309S/310S/316/316L/316LN/316Ti/317/317L/347/347H 400 series: 405/40

Duplex 2205 PlateDuplex 2205 Plate is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. Duplex 2205 Plate is the most broadly used duplex stainless metal grade and is characterised via excessive yield strength, double that of the standard austenitic stainless steel grades.

Stainless Steel 316 FlangesStainless Steel 316 Flanges are made up of a chromium nickel molybdenum alloy that is used ordinarily in chloride ion corrosion inclined environments. The molybdenum addition makes the cloth corrosion resistant, in particular to the chloride wealthy conditions. There are excessive carbon and low carbon variations of the 316 cloth which is used primarily based on the welding want and longevity of the utility intended.

ASME B16.5 SpecificationsSpecificationASME B16.5 FlangeType Of Industrial flangesBlind Flange/ Slip On Flange/ Weld Neck Flange/ Socket Weld Flanges/ RTJ Flanges/ Lap Joint Flanges/ Threaded/ Reducing FlangesFlanges Manufacturing MaterialStainless Steel, Brass, Bronze, Duplex Steel, Super Duplex, Incoloy, Alloy 20, Copper, Carbon Steel, Nickel Alloys, Tantalum, Cupro-Nickel Inconel, Monel, Titanium, Hastalloy, Alloy Steel.Type Of Pipe Flange MethodsForging/ Casting/ Rolling And CuttingANSI Flange Pressure ClassClass 150/ Class 300/ Class 400/ Class 600/ Class 600/ Class 900/ Class 1500/ Class

Duplex 2205 PipeThe yield power of 2205 duplex stainless metal is greater than double that of everyday austenitic stainless steel, which approves designers to sketch merchandise with decreased weight and offers this alloy a rate gain over 316,317L. This alloy is in particular appropriate for temperatures in the -50°F/+600°F range. Applications past this temperature vary may also additionally reflect onconsideration on the alloy, however there are some limitations, mainly when utilized to welded structures.Product ParameterSize4 to 219mm W.

We make use of hundred percent pure raw materials for manufacturing Duplex S31803 Coils that results in the production of high quality of goods. Duplex 31803 Coils has a huge number of applications in various industries. These coils are used in the manufacturing of the piping and tubing in the oils and gas exploration industries and are also used in the manufacturing of food processing equipment.

2205 duplex stainless steel Pipe SpecificationItemStainless Steel Tube/PipeSteel grade200series,300 series,400series,duplexStandardASTM A213,A312,ASTM A269,ASTM A778,ASTM A789,DIN 17456,DIN17457,DIN 17459,JIS G3459,JIS G3463,GOST9941,EN10216,BS3605,GB13296Material304,304L,309S,310S,316,316Ti,317,317L,321,347,347H,304N,316L, 316N,201,202,2205,2507,904lSurfacePolishing,annealing,pickling,brightTypehot rolled and cold rolledstainless steel round pipe/tubeSizeWall thickness1mm-150mm(SCH10-XXS)Outer diameter6mm-2500mm (3/8"-100")stainless steel square pipe/tubeSizeWall thickness1mm-150mm(

2205 Duplex Stainless Steel PlateDuplex 2205 is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. It is the most widely used duplex stainless steel grade and is characterized by high yield strength, double that of the standard austenitic stainless steel grades.

2205 Duplex Stainless Steel BarDuplex 2205 Stainless Steel is a nitrogen-enhanced duplex used in purposes requiring excessive electricity and magnificent corrosion resistance. It is designed to mix accelerated resistance to stress corrosion cracking, pitting and crevice corrosion.

Stainless Steel 304L FlangesStainless Steel 304L Flanges has a minimum of 18% chromium and 8% nickel. Type SS 304L Blind FLanges(BLRF) has a Carbon maximum is 0.035. Stainless Steel 304L Pipe Flanges is the standard "18/8 stainless" that is commonly found in Industrial Flanges and applications. 304L Stainless Steel Blind Flange is the most versatile and widely used alloy flange. The ultimate tensile strength (UTS) of SS 304L Spectacle Blind Flange is roughly~515 Mpa, 304L having a 0.2% yield  strength of~205Mpa.

2205 Duplex Stainless Steel Bar is the most widely used duplex (ferritic/austenitic) stainless steel grade.  It findsapplications due to both excellent corrosion resistance and high strength.Product Parameter：Stainless Steel barMaterial200 series: 201,202,202Cu,204Cu,300 series: 301, 303/Cu, 304/L/H, 304Cu, 305, 309/S, 310/S, 316/L/H/Ti, 321/H, 347/H, 330,400 series: 409/L, 410, 416/F, 420/F, 430, 431, 440C, 441, 444, 446,600 series: 13-8ph, 15-5ph, 17-4ph, 17-7ph(630,631), 660A/B/C/D,Duplex: 2205(UNSS31803/S32205), 2507(UNSS32750), UNSS32760, 2304, LDX2101.

2205 Stainless Steel PipeThe yield strength of 2205 duplex stainless steel is more than double that of regular austenitic stainless steel, which allows designers to design products with reduced weight and gives this alloy a price advantage over 316,317L. This alloy is particularly suitable for temperatures in the -50°F/+600°F range.

We mainly produce the Carbon and Alloy Steel Flanges, Nickel Alloy Steel Flanges, Stainless Steel Flanges. Here are the main types of the Flanges that we can supply for you.

Chrome steel plate of its confined overall performance of the choice, the general low precision seamless metallic pipe : wall thickness is not uniform, stainless steel plate's surface brightness is low, stainless-steel plate's fee of excessive-duration, and the advent of pitting, black spots are not smooth to take away.Products DescriptionProduct Namestainless steel plateThickness0.1~150mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial 200 series: 201/202 &nb

Chrome steel plate of its confined overall performance of the choice, the general low precision seamless metallic pipe : wall thickness is not uniform, stainless steel plate's surface brightness is low, stainless-steel plate's fee of excessive-duration, and the advent of pitting, black spots are not smooth to take away.Products DescriptionProduct Namestainless steel plateThickness0.1~150mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial 200 series: 201/202 &nb

Company ProfileSince its establishment Tianjin Xinyuan Stainless Steel Co., Ltd. has been steadily seeking progress with the care and support of colleagues and customers from all walks of life, and has developed into a comprehensive enterprise integrating stainless steel material processing and sales agents.Main materials: 201, 301, 304 (0Cr18Ni9), 304L (00Cr19Ni10), 321 (1Cr18Ni9Ti), 316 (0Cr17Ni12Mo2), 316L (00Cr17Ni14Mo2), 309S (0Cr23Ni13), 310S (0Cr25Ni20), 904L (00Cr20Ni25Mo4.5Gu) 316 , 317L, 317H, 304H, (SUS304, 321, 316, 310S, etc.). Duplex stainless steel (2205, 2507, 2520).

Flat welding flanges are suitable for pipeline systems with relatively low pressure levels and no serious pressure fluctuations, vibrations and shocks.

Super Duplex Stainless Steel S32750 Round bars contain chromium, molybdenum and nitrogen additions that are resistant to localised corrosion, such as pitting and crevice attack. Product Parameter：Stainless Steel barMaterial200 series: 201,202,202Cu,204Cu,300 series: 301, 303/Cu, 304/L/H, 304Cu, 305, 309/S, 310/S, 316/L/H/Ti, 321/H, 347/H, 330,400 series: 409/L, 410, 416/F, 420/F, 430, 431, 440C, 441, 444, 446,600 series: 13-8ph, 15-5ph, 17-4ph, 17-7ph(630,631), 660A/B/C/D,Duplex: 2205(UNSS31803/S32205), 2507(UNSS32750), UNSS32760, 2304, LDX2101.

Duplex polished ss 1mm 3mm 5mm 2205 2507  cold rolled stainless steel coilProducts DescriptionProduct Namestainless steel plateThickness0.1~150mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial 200 series: 201/202  300 series: 301/304/304L/305/309S/310S/316/316L/316LN/316Ti/317/317L/347/347H 400 series: 405/409/409L/410/420/430/440C/444/4447 600 series: 630/631 duplex stainless steel: 2205/2507/2520 super stainless steel: 904LFeature 

Stainless Steel PipeFormWelded and Seamless in Round.ApplicationFluid & Decorative.Size RangeDN15 – DN600.Grades304/304L & 316/316L.321,309S,310S,347H,2205,2507,254SMO,   Wall ThicknessSch 10S, 40S & 80S.FittingsButt Weld, Screwed & Socket Flanges (ANSI, Table E & Table D).ProcessingCut-to-length & polishing.The information provided is for standard stock product and does not encapsulate all available combinations.

Our style of twine made of stainless steel are not fine identified for his or her variety but are also appeared for his or her terrific pleasant, lengthy existence and sincerely reasonable prices.