alloy-manufacture,factory,supplier from China

This alloy has the following properties.1. High resistance to pitting and crevice corrosion in halide media and acidic media containing H2S2. Effective resistance to chloride ion stress corrosion cracking in practical applications3. Excellent corrosion resistance to all kinds of corrosion in the usual oxidizing and reducing environment4. Mechanical properties are improved compared to Cronifer 1925 LC-Alloy 904 L5.

The alloy is resistant to high temperature corrosion properties such as oxidation and carbonization. The alloy is *** resistant to corrosion in hot corrosion areas such as sulfide environments, especially oxidation and carbonization up to 1100°C cycles. These corrosion resistance coupled with excellent mechanical properties make this alloy particularly suitable for high temperature applications.

Copper Nickel Alloy Strip CoilCompany ProfileSince its establishment Tianjin Xinyuan Stainless Steel Co., Ltd. has been steadily seeking progress with the care and support of colleagues and customers from all walks of life, and has developed into a comprehensive enterprise integrating stainless steel material processing and sales agents.Main materials: 201, 301, 304 (0Cr18Ni9), 304L (00Cr19Ni10), 321 (1Cr18Ni9Ti), 316 (0Cr17Ni12Mo2), 316L (00Cr17Ni14Mo2), 309S (0Cr23Ni13), 310S (0Cr25Ni20), 904L (00Cr20Ni25Mo4.5Gu) 316 , 317L, 317H, 304H, (SUS304, 321, 316, 310S, etc.).

600 alloy (UNS NO6600) The alloy is widely used in the chemical industry for its strength and corrosion resistance. Applications include heaters, stills, bubbles and condensers for fatty acid processing; Evaporator tubes, segments and spalling pans for the manufacture of sodium sulfide; And equipment for processing plants.

Alloy 625 exhibits excellent corrosion resistance in many media.

This kind of material with high formability, many is given priority to with brocade alloy are more likely to be welded.

The chemical composition of Monel400 alloy is mainly composed of 30%Cu and 65%Ni plus a small amount of Fe(1%-2%). The structure is typical monophasic austenite.

ApplicationThe softened and annealed low carbon alloy 625 is widely used in the chemical process industry.

GH3039 is a single-phase Austenitic solid solution reinforced alloy with moderate thermal strength and good thermal fatigue properties below 800℃ and good oxidation resistance below 1000℃. Long-term use of stable structure, but also has good cold formability and welding performance. Suitable for aero engine combustion chamber and afterburner parts used for a long time below 850℃.

Inconel 617 corrosion and heat resistance.Inconel 617 alloy has good corrosion resistance in thermally corrosive areas such as sulfide environments, especially oxidizing and carbonizing environments that cycle up to 1100°C.

Incoloy Alloy A-286 is readily fabricated by standard procedures for stainless steel and alloys.

Incoloy 925 precipitation strengtheningBy aging treatment, the second phase (γ', γ", carbide, etc.) is precipitated from the supersaturated solid solution to strengthen the alloy. γ' phase is the same as the matrix, which is face-centered cubic structure, with similar dotting constants to the matrix, and co-grid with the crystal, so the γ phase can be uniformly precipitated in the matrix in the form of fine particles, impeding dislocation movement, and producing significant strengthening effect.

Hastelloy C-2000, named UNS N06200, is a nickel-chromium-molybdenum alloy. Adding a certain amount of copper to sulfuric acid, hydrofluoric acid and dilute hydrochloric acid can improve its temperature resistance. The high chromium content enables maximum resistance to oxidation chemicals and process flows contaminated by iron ions and dissolved oxygen. The alloy has excellent resistance to chloride and corrosion.

Hastelloy C-2000 Hastelloy C-2000, an optimized alloy developed to expand the application range of materials, began with the conceptual idea of adding copper to an already well-established Ni-Cr-Mo alloy. Since it entered the market in late 1995, it has continued to receive great acclaim from the market, thanks to its inherent versatility. The technical innovation not only improves the resistance of the alloy to water corrosion, but also expands the overall application range of Ni-Cr-Mo family alloys.

HASTELLOY C-4 alloy has exceptional resistance to wide variety of chemical process environments.

GH3128(GH128) Application field· Aero engine combustion chamber flame cylinder, afterburner shell and regulating plate· Structural components of gas turbine combustion chamber· Turbine engine combustion chamber components· Afterburner componentsGH4169 Application field· Main combustion chamber and afterburner of aviation engine· Welded structural parts of aeroengine· Engine mounting edge and conduit· Guide blade partsTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery

Corrosion resistance of inconel 601 alloy:An important property of alloy 601 is its resistance to oxidation at temperatures up to 1180°C. Even under very severe conditions, such as heating and cooling cycles, 601 generates a dense oxide film to achieve high resistance to spalling. Even under severe conditions, such as heating and cooling cycles, 601 can generate a dense oxide film to obtain high resistance to flaking. 601 has good resistance to carbonization.

Alloy 400 from NeoNickel has superb corrosion resistance, particularly in neutral and alkaline salts. It is also one of a limited number of alloys that can be used in conjunction with hydrofluoric acid and fluorine. With high nickel content, this alloy is immune to chloride-induced stress corrosion cracking.

The C276 alloy (UNS N10276) is used in chemical processing, pollution control, pulp and paper production, industrial and municipal waste disposal, and recovery of "sour" natural gas.

Alloy B-2 is a nickel-molybdenum alloy with significant resistance to reducing environments, such as hydrogen chloride gas and sulphuric, acetic and phosphoric acids. Hastelloy® B-2 provides resistance to pure sulphuric acid and a number of non-oxidizing acids. The alloy should not be used in oxidizing media or where oxidizing contaminants are available in reducing media.

Alloy Inconel 625 is a low-carbon nickel-chromium-molybdenum alloy with excellent breadability to various corrosive media, non-magnetic; good strength, toughness and excellent fatigue resistance in environments ranging from low temperatures to 1093°C (2000°F), thanks to the low carbon content and solid solution treatmentTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy:

 DIN 2.4375/MONEL K-500/UNS N05500 Alloy Steel Plate TypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etcMonel: Monel 400/K500/R405,etcNitronic 40/50/60/75

C-276 alloy welding performance and common austenitic stainless steel is similar to using a welding method for welding C-276 before, we must take measures to make the corrosion resistance of the weld and heat affected zone the smallest decline, such as tungsten gas shielded arc welding (GTAW), gas metal arc welding (GMAW), submerged arc welding or some other can make the weld and heat affected zone the smallest decline in corrosion resistance welding method.

ASTM B575 Alloy C-2000 / UNS N06200 Nickel Alloy Sheet Strip,c276 c4 alloy plateTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etcMonel: Monel 400/K500/R405,etcNit