500 nickel alloy plate-manufacture,factory,supplier from China

Alloy K-500 (UNS N05500) is a nickel-copper alloy.

The chemical composition of Monel400 alloy is mainly composed of 30%Cu and 65%Ni plus a small amount of Fe(1%-2%). The structure is typical monophasic austenite.

GH3128(GH128) Application field· Aero engine combustion chamber flame cylinder, afterburner shell and regulating plate· Structural components of gas turbine combustion chamber· Turbine engine combustion chamber components· Afterburner componentsGH4169 Application field· Main combustion chamber and afterburner of aviation engine· Welded structural parts of aeroengine· Engine mounting edge and conduit· Guide blade partsTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery

Product ShowProduct NameHigh Quality Hot Rolling ASTM 201 304 304L 316 316L 321 904L 2205 2507 Stainless Steel Plate TypeCold rolled / Hot rolledStandard GB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / S31803 / S32750 / S32205 etcMonel 400 / Monel K-500 Inconel 600 / Inconel 601 / Inconel 625 / Inconel 617 / Inconel 690 / Inconel 718 / Inconel X-750Incoloy A-286 / Incoloy 800 / Incoloy 800H / Incoloy 800HTIncoloy 825 / Incoloy 901 / Incoloy 925 / Incoloy 926Nimonic 75 / Nimonic 80A / Nimonic 90

The 904L stainless steel plate mainly uses a special corrosion-resistant alloy, mainly because the carbon content of this alloy is very low, which is several times lower than other models, so the probability of being corroded is greatly reduced. . We all know that in some areas with harsh environments, when stainless steel plates are used, the most worrying thing is that they will be corroded. Some of them will be corroded if they cannot last for a long time.

Copper Nickel Alloy Strip CoilCompany ProfileSince its establishment Tianjin Xinyuan Stainless Steel Co., Ltd. has been steadily seeking progress with the care and support of colleagues and customers from all walks of life, and has developed into a comprehensive enterprise integrating stainless steel material processing and sales agents.Main materials: 201, 301, 304 (0Cr18Ni9), 304L (00Cr19Ni10), 321 (1Cr18Ni9Ti), 316 (0Cr17Ni12Mo2), 316L (00Cr17Ni14Mo2), 309S (0Cr23Ni13), 310S (0Cr25Ni20), 904L (00Cr20Ni25Mo4.5Gu) 316 , 317L, 317H, 304H, (SUS304, 321, 316, 310S, etc.).

The Incoloy 800HT has further modified the combined titanium and aluminum levels (.85-1.20%) to ensure optimal high-temperature performance. The nickel alloy is dual certified (800H/HT) to combine the characteristics of both forms.

Nickel Base Alloy Plate It should be noted that active metals cannot be used in fluorine-containing environment (for example, Hastelloy C2000, NICU alloy, etc. can be used in hydrofluoric acid environment).Nickel Base Alloy is Active metals ,it also have good corrosion resistance, and the typical representative is Ti; Zr; TA et al; The most typical one is Ti; Titanium material has a wide range of applications, mainly used in some corrosion environments that stainless steel can not adapt to.

GH3044 is a solid solution strengthened nickel-based anti-oxidant alloy with high plasticity and moderate thermal strength under 900℃, and has excellent oxidation resistance and good stamping and welding process performance. It is suitable for manufacturing the main combustion chamber and afterburner parts, heat shield and guide blade of aviation engines working under 900℃ for a long time.

 DIN 2.4375/MONEL K-500/UNS N05500 Alloy Steel Plate TypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etcMonel: Monel 400/K500/R405,etcNitronic 40/50/60/75

Alloy Inconel 625 is a low-carbon nickel-chromium-molybdenum alloy with excellent breadability to various corrosive media, non-magnetic; good strength, toughness and excellent fatigue resistance in environments ranging from low temperatures to 1093°C (2000°F), thanks to the low carbon content and solid solution treatmentTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy:

Stainless steel plate surface smooth, high plasticity, toughness and mechanical strength, acid, alkaline gas, solution and other media corrosion. It is an alloy steel that is resistant to rust, but not absolutely resistant to rust.

Hastelloy C22 Nickel Chromium Plate SheetApplication:Hastelloy C-22 alloys are used in a wide range of chemical and petrochemical programs, which includes in additives and catalytic structures that come into contact with chloride-containing organics.This material is specially suitable to be used in high temperature, inorganic and organic acids combined with impurities (together with formic acid and acetic acid), and seawater corrosive environments.Hastelloy C22 Nickel Chromium Plate Sheet  Chemical composition: Alloy % Ni Cr Mo Fe W Co C M

Corrosion resistance of Incoloy 800H:800H is resistant to many corrosive media. Its high nickel content gives it good resistance to stress corrosion cracking in aqueous corrosion conditions. The high chromium content gives it better resistance to pitting and crevice corrosion cracking. The alloy has good resistance to nitric and organic acid corrosion, but has limited resistance in sulfuric and hydrochloric acids. It has good resistance to corrosion in oxidizing and non-oxidizing salts, except for the possibility of pitting corrosion in halides.

Incoloy 800H Nickel Base Alloy Pipe Application：National defense, astronautics, transportation, equipment manufacture, shipping, petroleum, nuclear power industry, oil and gas industry, and chemical industry etc.Product Parameter：Product NameChina Factory Supplier Nickel Based Alloy Steel Astm B444 Uns N06625 Inconel 625 Din2.4856 Alloy 625 Steel Pipe TubeStandardGB,AISI,ASTM,DIN,EN,JISGradeStainless steel 304 / 304L / 310S / 316L / 316Ti / 316LN / 317L / 904L / 2205 / 2507 / 32760 / 253MA / 254SMo / XM-19 / S31803 /S32750 / S32205 / F50 / F60 / F55 / F60 / F61 / F65 etcMonel 400 / Monel K-500

GH3039 is a single-phase Austenitic solid solution reinforced alloy with moderate thermal strength and good thermal fatigue properties below 800℃ and good oxidation resistance below 1000℃. Long-term use of stable structure, but also has good cold formability and welding performance. Suitable for aero engine combustion chamber and afterburner parts used for a long time below 850℃.

Incoloy 925 precipitation strengtheningBy aging treatment, the second phase (γ', γ", carbide, etc.) is precipitated from the supersaturated solid solution to strengthen the alloy. γ' phase is the same as the matrix, which is face-centered cubic structure, with similar dotting constants to the matrix, and co-grid with the crystal, so the γ phase can be uniformly precipitated in the matrix in the form of fine particles, impeding dislocation movement, and producing significant strengthening effect.

Application example: The exhaust valve of diesel engine for ship and tank is mainly made by Nimonic 80A forging. Nimonic 80A has high heat resistance, high strength at high temperature, large deformation resistance, increasing the difficulty of forging forming.

Incoloy 926 nickel-based alloy application areas:1、Fire protection system, seawater purification system, hydraulic and perfusion piping system in marine engineering:2、Bleaching pool in cellulose pulp production;3、Polishing rods in corrosive oil wells:4、Hose system in marine engineering:5、Piping, joints, airflow system in acid gas production, etc;6、Components in flue gas desulfurization system;7、Evaporator, heat exchanger, filter, mixer, etc.

The Incoloy 800HT is resistant to many corrosive media. Its high nickel content makes it have good resistance to stress corrosion cracking under water-based corrosion conditions. High chromium content makes it have better resistance to spot corrosion and crevice corrosion cracking. The alloy has good resistance to nitric acid and organic acid, but limited resistance to sulfuric acid and hydrochloric acid. Excellent corrosion resistance in oxidizing and non-oxidizing salts, except for the possibility of point corrosion in halides.

Products DescriptionStainless steel plate  is a type of hollow segment without a seams around.the thicker the thickness of the product, chrome steel plate is extra low cost and practical, the thinner the wall thickness, stainless-steel plate's processing charges will upward push significantly. Product Namel stainless steel plateThickness0.1~150mmWidth600mm,1000mm,1219mm,1500mm,1800mm,2000mm,2500mm, 3000mm, 3500mm,etcLength2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etcStandardASTM GB/T JIS4 ASME BS DIN ENMaterial200 series: 201/202300 series: 301/304/304L/305/309S/310S/316/316L/316LN

S31803 Plate S31803 Plate  is a standard duplex grade duplex stainless steel alloy. It has the microstructure of equal austenite to ferrite ratio. SA 240 UNS S31803 Sheet is a combination of reliable mechanical stability, ductility and good corrosion resistance properties.

Inconel 617 is known for its use in extreme environments, exhibiting high-temperature strength and oxidation resistance even at temperatures in excess of 1800 degrees Fahrenheit (980 degrees Celsius) as well as excellent corrosion resistance to a variety of corrosive environments. It is the unique properties of the Inconel617 that make it ideal for a wide range of components in the power generation, nuclear, petrochemical, food processing, aerospace, heat treatment and chemical industries.

Nickel alloy inconel 600 601 625 sheet and plate 1.5mm/2.0mm/5.0mm/8.0mm thkTypeNickel Alloy Sheet/PlateThickness0.8-36mmLength3000mm, 5800mm, 6000mm,etcWidth1000mm,1500mm,2000mm,etcStandardASTM,AISI,JIS,DIN,ENApplicationConstruction,Ship,Boiler,Machinery,etcCertificationISO,SGS,TUVTechniqueCold Rolled/Hot RolledEdgeMill Edge/ Silt EdgeGradeHastelloy: Hastelloy B/ -2/B-3/C22/C-4/S/ C276/C-2000/G-35/G-30/X/N/g;etcInconel 600/601/602CA/617/625/713/718/738/X-750;ETCIncoloy: Incoloy 800/800H/800HT/825/925/926;etcGH: GH2132,GH3030,GH3039,GH3128,GH4180,GH3044,etcMonel: Monel 400/K500/R405,etcNitroni