410S-manufacture,factory,supplier from China

Stainless steel coil: Material: SUS201, 202, 304, 316L, 316Ti, 321, 304L, 441, 444, 436, 439, 430, 409L, 410S, 309S, 310S, 904L, 2205, 2507, etc.  Thickness: 0.3-16.0mm, width 1 meter, 1.22 meters, 1.5 meters, 1.8 meters, 2 meters, non-standard can be customized.   Stainless steel properties:As a widely used steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties;  Stamping, bending and other hot workability, no heat treatment hardening phenomenon (use temperature -196℃~800℃).  Household products (cl

Laying points of stainless steel elbow in pipeline:1. In order to reduce the heat loss of the stainless steel elbow and prevent thermal deformation, the buried depth of the pipeline should be greater than 1.2 meters. (calculated from the top of the pipe). The burial depth in alpine regions should be appropriately deepened. At the same time, all pipes should be avoided to be laid below the water table.2. For areas where the groundwater level is high or it is difficult to dig deep for other reasons, measures should be taken as far as possible to avoid water insulators before burying the pipes.

Stainless steel is initially by British scientists Henry cabral, doing research on the improvement of weapons found and the stainless steel in which the research has a strong dirt, acid resistance, corrosion resistance, wear resistance, no radioactive environmental products in developed some stainless steel products to pop up to now and slowly instead of the other material products.From material selection to molding, the stainless steel products cast by us have gone through 33 years of process processing. The surface technology adopts stainless steel primary color mirror polishing.

The  maximum not unusualplace chrome steel grades are 304 and 316. The key distinction is the addition of molybdenum, an alloy which substantially complements corrosion resistance, mainly for greater saline or chloride-uncovered environments.316 chrome steel consists of molybdenum. 304 chrome steel does not.For out of doors fixtures like rails and bollards, chrome steel is a really perfect corrosion-resistant material, however it'll most effective resist long-time period publicity if the grade is suitable for its environment.

What is 316 Stainless Steel?Grade 316 is a famous alloy of stainless metal with a melting vary of 2,500 °F – 2,550 °F (1,371 °C – 1,399 °C). As an austenitic stainless metal alloy, it has features such as excessive strength, corrosion resistance, and excessive concentrations of chromium and nickel.

STOCK SIZE RANGE AND SPECIFICATIONS:WELDED PRODUCTSEAMLESS PRODUCTNPS: 1/8” through 24”NPS: 1/8” through 8”Schedules: 5, 10S, 10, 30, 40S, 40, 80, 80SSchedules: 10, 40, 80, 160, XXHSpecifications: ASTM A312, ASME SA312Specifications: ASTM A312,ASME SA312Corrosion tested to MIL-P-24691/3 or A262 Practice ETypical Chemical Composition % (max values, unless noted)Weight %CMnPSSiCrNiMo316.082.00.045.0301.0016.0-18.011.0-14.02.0-3.0316L.0352.00.045.0301.0016.0-18.010.0-14.02.0-3.0Typical Mechanical PropertiesGradeTensile Ultimate/MinYield/MinElongation/MinKSIMPAKS

Sanitary elbow encyclopediaDepending on your requirements, sanitary elbow  can be austenitic or ferritic, and is defined by being seamless and easy to clean, suitable for pharmaceuticals, food and beverage, and drinking water applications.Introduction of sanitary elbow:Material: 304 material and 316L material are two common materials.Product categories: 90 degree long elbow, 90 degree short elbow, 45 degree short elbow, 45 degree long elbow, 180 degree elbow.Connection method: clamp (quick installation) type, butt welding (welding machine) type, thread (slip knot) type.Standard: 3A, DIN,

Spec ChartsType 304Hot Rolled, Annealed and PickledThickness and WidthWeight Lbs. per Sq. Ft.Weight Lbs. per LengthLength3/16 x 488.579343.1610'1/4 x 4811.16357.128'1/4 x 4811.16446.4010'5/16 x 4813.75550.0010'3/8 x 4816.50660.0010'1/2 x 4821.63865.2010'5/8 x 4826.831,073.2010'3/4 x 4832.121,284.8010'1 x 4842.671,706.8010'1 1/2 x 4863.342,533.6010'

Description: A002 is an ultra-low carbon Cr19Ni10 stainless steel electrode with titanium calcium type coating.The carbon content of the metallization is less than 0.04%, which has good resistance to intergranular corrosion, and can be used for both AC and DC.Have good operating process performance.Uses: For welding ultra-low carbon Cr1Ni10 stainless steel structures, also for 0G19NThe working temperature of i11Ti is lower than 3000C with corrosion-resistant stainless steel lining structure.

First, the marine fieldWhether it is in the search work on the seabed, or in the application and promotion of products, the use of stainless steel bars can achieve a good anti-corrosion effect. We all know that if steel products are placed in water, it is easy to rust, especially when iron products and seawater are in contact with the impact of oxidation, it is easy to cause rust and other bad conditions. Therefore, in the face of this phenomenon, it can be applied by selecting stainless steel materials.